Galvanized Steel Tapes

General Details

Application: for cable armoring.

Finish: The surface of Galvanized steel tapes is free form scales, seams, Zinc flakes and other surface imperfection. The zinc coating smooth and continuous.

Thickness: 0.15 mm to 2.00 mm

Width: 4 mm to 1250 mm

Technical Specifications:
Tensile Strength
: 28 to 50 kgf/mm2
: Minimum 10% on 250 mm gauge length.

Zinc Coating: Minimum 110 g/m2 (total weight on all four sides). However, this can be increased to suit customer’s requirements.

0.10 to 2.00 0.30 to 2.00 0.12 to 1.20 0.30 to 2.00
Up to 1250 Up to 1250 660, 762, 800, 900, 1050 Up to 1250
Up to 4500 Up to 4500 Up to 4100 ( 16″) Up to 4500
Surface Finish Regular And minimum Spangles Mate with Zero/minimum Spangles Regular Spangles Matte
Coating Mass
80 to 300 80 to 300 80 to 300 80 to 300
Grades Soft/Lock Forming EDD, DD & D
Roofing EDD, DD&D

Packing: Galvanized steel coils are wrapped in strong water proof sea-worthy packing and are in palletized loads.

Other types of packing can be done as required, such as: the coil core with the cardboard tube inside. 

Delivery Form: Galvanized Steel Tapes are supplied in continuous lengths in ribbon wound coils.

Coil Size: Inside Diameter- minimum 150 mm, Outside Diameter – Within 400-800.

Testing: Galvanized Steel Tapes are manufactured according to customer’s requirements and specifications.

Our products conform to the following standards:

  • ASTM A90 BS 2989
  • ASTM A93 IS 3975
  • ASTM A459
Send Inquiry

Product Name:

* Product Detail:

* Your Name:

* Company Name:

Phone Number:

* E-mail Address:

(Please make sure this email is correct and available. we will contact you through it.)

Code: captcha

* Enter the code: